Overview - Chapter 3
Sweeping Mode
The Sweeping Mode parameter (Parameter mode, Page 3) determines whether the Flanger effect will occur only once, or continuously.
¥When set to ONE CYCLE ONLY, the Flanger effect (when triggered) will cycle once, and then stop until it is triggered again.
¥When set to CONTINUOUS, the Flanger effect (when triggered) will cycle continuously, until it is triggered again (at which point the cycle begins again at the Retrigger Point of the cycle).
Trigger Source
The Trigger Source parameter (Parameter mode, Page 4) determines what will trigger the Flanger effect. This can be set to: Audio Left, Audio Right, Audio L & R, Advance Footswitch or Bypass Footswitch.
¥When set to AUDIO LEFT, AUDIO RIGHT or AUDIO L & R, the Flanger effect will be triggered whenever an audio level greater than
¥When set to either ADVANCE FOOTSWITCH or BYPASS FOOTSWITCH, the selected footswitch will not perform its normal function (that of advancing to the next Program or bypassing effects, respectively). Instead, the Flanger effect will be triggered when the selected footswitch is pressed.
Q20 Reference Manual | 43 |