Chapter 1 - Setting Up
Stereo. In the case where a stereo instrument, such as a keyboard or sampler, is connected to two separate channels of a mixing console, you will need two 1/4" TRS cables, one for each channel. The connection is made in a similar fashion as described above.
Right | Right |
Input | Output |
Left | Left |
Input | Output |
Left | Right |
Insert | Insert |
Using Main Outputs
When you want to effect everything on the mixer, you can connect the Q20 between the mixerÕs outputs and the amplifierÕs or tape machineÕs inputs. This is done by using two cables to connect the Left and Right Main Outputs of the mixing console to the [L] and [R] INPUTs of the Q20. The [L] and [R] OUTPUTs of the Q20 are then connected to a stereo amplifier, or two input channels of another mixing console (for
Left Right
Output Output
|
|
|
|
|
|
|
|
|
|
|
| Left |
| Right | |
|
|
|
| Input |
| Input | |
|
|
|
| Left |
| Right | |
|
|
|
| Master |
| Master | |
|
|
|
| Out |
| Out | |
|
|
|
|
|
|
|
|
Power | Power |
Amp | Amp |
Left | Right |
Input | Input |
Out to Speakers
14 | Q20 Reference Manual |