Making Your Own Programs - Chapter 4
Block Copy & Paste
It is also possible to duplicate a single effect block, including all of its parameter settings, into any other User Program. This feature is called Block Copy & Paste, and it is found in Type mode, Page 4. The concept is simple: first you select a Block with the [< BLOCK >] buttons, and copy it. Then select another Block location (even in another Program) and paste in the original Block.
To copy and paste a Block:
➀Recall the Program which has the Block effect you wish to copy.
➁Select the desired Block by using the [< BLOCK >] buttons to position the down- pointing arrow above it in the display.
➂With the Block selected, press the [TYPE] button to select Type mode.
➃Press the [< PAGE] button once to select Page 4 of Type Mode. This display should look like this:
COPY/PASTE BLOCK: COPY
➄Press the [VALUE/ENTER] button to copy the selected block. The display will momentarily read:
COPYING BLOCK...
➅Optional: Press [PROGRAM] and use the [VALUE] knob to select another Program.
➆Select the Block position you wish to paste the copied Block into by using the [< BLOCK >] buttons to move the
⑧Press the [TYPE] button, followed by the [ < PAGE] button to select Type mode Page 4.
⑨Turn the [VALUE] knob to select the PASTE function. This display should look like this:
COPY/PASTE BLOCK: PASTE
⑩Press the [VALUE/ENTER] button to paste the copied Block. The display will momentarily read:
PASTING BLOCK...
The Block will now appear in the selected location. If another Block already existed in the selected location, it will be replaced.
Q20 Reference Manual | 65 |