Chapter 6 - Advanced Applications
If sending a single Program, the display will not change when the [VALUE/ENTER] button is pressed, since this effectively takes no time at all.
➈When you send a SysEx dump back to the Q20, it will automatically go into receive mode (you do not have to do anything special). When this occurs, the display will momentarily read:
RECEIVING MIDI DATA...
If you donÕt want the Q20 to receive SysEx dumps, go to MIDI Page 5, and set System Exclusive Receive to OFF.
MIDI Thru
In order to pass on MIDI information from a control device thru the Q20 to another MIDI device:
➀Connect the control deviceÕs MIDI OUT to the Q20Õs [MIDI IN].
➁Connect the Q20Õs [MIDI OUT] to the MIDI IN of the other device you wish to control.
➂Press [MIDI].
The [MIDI] LED will light.
➃Press [PAGE >] four times to advance to MIDI Page 4. The display will read:
MIDI THRU: OFF
➄Turn the [VALUE/ENTER] knob to the right to turn MIDI Thru ÒONÓ.
MIDI THRU: ON
90 | Q20 Reference Manual |