Alliance Laundry Systems HX, SX, UX OPL 8. NO OUTPUT VOLTAGE TO COMPONENTS

Section 3 Troubleshooting

8. NO OUTPUT VOLTAGE TO COMPONENTS

1
Is there
voltage (refer to
Figure 1) on the main			NO
					Replace the
board terminals that
the wires going to the					main board.
component are
connected
to?
	YES
2
Is
there
voltage (refer to		NO
Figure 1) on the				Repair/replace the wiring as
wires on the input				needed.
side of the
components?
	YES

Repair/replace the component as needed.

Component Voltage/Reading Points Chart

Component	Voltage Reading Points	Voltage Reading
Water
Flush A	Clear wire to Blue wire	220 Volts AC
Hard Fill	White/Black wire to Blue wire	220 Volts AC
Hot Fill	Red wire to Blue wire	220 Volts AC
Cold Fill	Gray wire to Blue wire	220 Volts AC
Flush C	White wire to Blue wire	220 Volts AC
Flush B	Purple wire to Blue wire	220 Volts AC
Drain
Drain Motor Fan	Clear wire to Blue wire	220 Volts AC
Drive Fan	Clear wire to Blue wire	220 Volts AC
Door
Door Latch Switch	Orange/White wire to White/Brown wire	5 Volts DC
Door Lock Switch	Orange/White wire to White/Black wire	5 Volts DC
Door Solenoid	Black wire to Red or White wire	70 Volts AC
Tilt
Tilt	White/Purple wire to White/Orange wire	5 Volts DC
Soap
S4	White/Orange wire to Black wire	24 Volts DC
S5	Red/Black wire to Black wire	24 Volts DC
S6	Yellow/Red wire to Black wire	24 Volts DC
S7	White/Brown wire to Black wire	24 Volts DC
S8	Red/Gray wire to Black wire	24 Volts DC
S9	White/Red wire to Black wire	24 Volts DC
		CFD2000S
	Figure 1

38 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001900