Alliance Laundry Systems HX, SX, UX OPL 16. NO KEYPAD BOARD FUNCTIONS

Section 3 Troubleshooting

16. NO KEYPAD BOARD FUNCTIONS

With the

display reading

“CYCLE00,” select a two-digit cycle (e.g., enter “0” and “9” for cycle “09”). Does the keypad react with a single beep and by changing the display

to “CYCLE09”?

If you hear either double beeps or no beeps at all, replace the keypad board.

If the cycle starts on the display but no functions are taking place, go to the

“NO OUTPUT VOLTAGE TO COMPONENTS” flowchart, step 1.

YES

Press the

NOstart button on the keypad. do you hear a single beep?

YES

Does

the display

change, indicating

that the computer has

YES gone into the cycle that has been selected (e.g., does

the “NEXT09” display

change to

“STEP 01 CYCLE09”

“HOT LOW”)?

Replace the keypad board. If the problem persists, contact Alliance Laundry Systems’ customer service department.

CFD1987S

9001900