Section 4 Service Procedures

WARNING

To reduce the risk of electrical shock, fire, explosion, serious injury or death:

•Disconnect electrical power to the washer-extractor before servicing it.

•Close the gas shut-off valve to the washer-extractor (when applicable) before servicing it.

•Never start the washer-extractor with any guards/panels removed.

•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the washer-extractor is properly grounded.

W461R1

24.REAR PANEL REMOVAL AND REPLACEMENT

Refer to Figure 8.

REMOVAL

a.Turn off power to the machine.

b.Remove the screws that attach the rear panel to the machine.

c.Remove the rear panel from the machine.

REPLACEMENT

a.Position the rear panel on the machine.

b.Replace the screws that attach the rear panel to the machine.

25.SIDE PANEL REMOVAL AND INSTALLATION

Refer to Figure 9.

REMOVAL

a.Turn off power to the machine.

b.Remove the screws and nuts that attach the side panel to the machine.

c.Remove the side panel from the machine.

INSTALLATION

a.Position the side panel on the machine.

b.Replace the screws and nuts that attach the side panel to the machine.

Rear

Panel

CFD8S

Side

Panel

CFD7S

Figure 9

Figure 8

9001900

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

71