Allied Telesis x600-24Ts-POE manual Securing the AT-StackXG Stacking Module

Chapter 3: Installing the Hardware

Caution

Do not force AT-StackXG module into place. Doing so may damage the connector pins on the backplane inside the chassis. If there is resistance, remove the module and reinsert it after verifying that the edges of the card are properly aligned in the guides in the chassis’ module slot.

A
AT--
LXSta
	44CPU
	ckXGCVR
	Stack
	Port 1
	Stack	1242
		Port 2

Figure 36. Installing the AT-StackXG Stacking Module

4.Secure AT-StackXG module to the chassis by tightening the two captive screws with a cross-head screwdriver.

-	A
	AT-
	LX44CPUCV
	StackXGR
	Stack
	Port 1
	Stack
	Port 2
	1243

Figure 37. Securing the AT-StackXG Stacking Module

74