Allied Telesis x600-24Ts-POE manual List of Figures, SD Card

List of Figures

Figure 1.	x600-24Ts Switch	21
Figure 2.	x600-24Ts/XP Switch	22
Figure 3.	x600-48Ts Switch	23
Figure 4.	x600-48Ts/XP Switch	24
Figure 5. x600-24Ts-POE Switch		25
Figure 6.	SFP Transceiver	28
Figure 7.	XFP Transceiver	29
Figure 8.	SD Card Slot	31
Figure 9. SD Card		31
Figure 10. Port LEDs on x600-24Ts and x600-24Ts/XP Switches		32
Figure 11. Port LEDs on x600-48Ts and the x600-48Ts/XP Switches		32
Figure 12. Port LEDs on x600-24Ts-POE Switch		33
Figure 13. SFP LEDs - x600-24 Port Switch		34
Figure 14. SFP LEDs - x600-48 Port Switch		35
Figure 15. XFP LEDs on x600-24Ts/XP and x600-48Ts/XP Switches		35
Figure 16. System STATUS LEDs		36
Figure 17. Non PoE Switch STACK LEDs		37
Figure 18. x600-24/Ts-POE STACK LEDs		37
Figure 19.	Secure Digital Slot LED	39
Figure 20. AT-RPS3204 Redundant Power Supply Unit		44
Figure 21.	AT-LBM Module installed in x600-48Ts/XP Expansion Slot	45
Figure 22. VCS Stacking Module (AT-StackXG)		46
Figure 23.	Back-to-Back Topology (x600 Switches)	51
Figure 24. VCS Ring Topology Using x600 Switches		52
Figure 25.	Resiliency link connecting to switch ports over the ResiliencyLink VLAN	54
Figure 26.	Resiliency link connecting to switch ports over the ResiliencyLink VLAN using a network hub	54
Figure 27. STACK and STATUS LEDs		58
Figure 28.	Power Cord Retaining Clip	68
Figure 29.	Inserting the Retaining Clip into the Retaining Bracket	68
Figure 30. Removing the Feet		69
Figure 31.	Attaching Rack-Mount Brackets	69
Figure 32.	Mounting the Switch in a Rack	70
Figure 33.	Resetting the Switch	71
Figure 34. VC Stacking (AT-StackXG) Module		72
Figure 35.	Removing the Blank Panel from the Expansion Slot	73
Figure 36.	Installing the AT-StackXG Stacking Module	74
Figure 37. Securing the AT-StackXG Stacking Module		74
Figure 38.	Removing the Plastic Protector	75
Figure 39. Removing a Dust Plug from an SFP Slot		80
Figure 40.	Installing an SFP Transceiver	81
Figure 41. Positioning Handles on the x600-24Ts and x600-24Ts/XP Switches		81
Figure 42. Positioning SFP Handles on the x600-48Ts and x600-48Ts/XP Switches		82
Figure 43. Removing an XFP Dust Plug		83
Figure 44.	Installing an XFP Transceiver	83
Figure 45.	Power Cord Retaining Clip in the Up Position	86
Figure 46. Connecting the AC Power Cord		86
Figure 47. Connecting the Management Cable to the RJ-45 Terminal Port on the Switch		87
Figure 48. RJ-45 Connector and Port Pin Layout		104
Figure 49. AT-RPS310417-Pin Connector Layout		106
Figure 50. AT-RPS320421-pinD-combo Connector and Port Pin Layout		108

9