Allied Telesis x600-24Ts/XP, x600-48Ts, x600-24Ts-POE, X600-24TS Port LEDs, 10/100/1000 Base-T LEDs

x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide

Port LEDs

10/100/1000 Base-T LEDs

The following sections describe the 10/100/1000Base-T port, SFP, and XFP LEDs.

Each port has two LEDs labeled L/A (link/activity) and D/C (duplex mode/ collisions) on the non-PoE models. The x600-24Ts-POE and

x600-24Ts-POE+ port LEDs are labeled L/A (link/activity) and PoE (Power over Ethernet).

Figure 11 shows the port LEDs for the x600-24Ts and x600-24Ts/XP switches. These LEDs are separated from the 10/100/1000Base-T port locations on the front panel.

1 3

L/A

D/C

L/A

D/C

2 4

1614

Figure 11. Port LEDs on x600-24Ts and x600-24Ts/XP Switches

Figure 12 shows the port LEDs for the x600-48Ts and the x600-48Ts/XP switches. These LEDs are located in the upper and lower corners of each port.

LINK/ACT	DUP/COL
LED	LED
LINK/ACT	DUP/COL
LED	LED
	1467

Figure 12. Port LEDs on x600-48Ts and x600-48Ts/XP Switches

31