Allied Telesis x600-24Ts/XP, x600-48Ts, x600-24Ts-POE, X600-24TS-POE+ Non PoE Switch Stack LEDs

x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide

STACK LEDs

The STACK LEDs reflect the link status of the two stack ports on the AT-StackXG Stacking Module and if the switch is the master unit of the stack. To locate the STACK LEDs for any of the non-PoE x600 switches, see Figure 18. To locate the STACK LEDs for either the x600-24Ts-POE or x600-24Ts-POE+ switch, see Figure 19.

STACK

MSTR

1 L/A

2 L/A

PRES

1623

Figure 18. Non PoE Switch STACK LEDs

STACK

MSTR L

1	L/A	P
2	L/A	L
		P
		1600

Figure 19. x600-24Ts-POE and x600-24Ts-POE+ STACK LEDs

These LEDs remain off if the module or the stack cables are not installed.

See Table 7 on page 38 for a description of the STACK LEDs.

37