Allied Telesis x600-24Ts/XP, x600-48Ts, x600-24Ts-POE manual List of Figures, X600-24Ts-POE Switch

List of Figures

Figure 1.	x600-24Ts Switch	19
Figure 2.	x600-24Ts/XP Switch	20
Figure 3.	x600-48Ts Switch	21
Figure 4.	x600-48Ts/XP Switch	22
Figure 5. x600-24Ts-POE Switch		23
Figure 6. x600-24Ts-POE+ Switch		24
Figure 7.	SFP Transceiver	27
Figure 8.	XFP Transceiver	28
Figure 9.	SD Card Slot	30
Figure 10. SD Card		30
Figure 11. Port LEDs on x600-24Ts and x600-24Ts/XP Switches		31
Figure 12. Port LEDs on x600-48Ts and x600-48Ts/XP Switches		31
Figure 13. Port LEDs on x600-24Ts-POE and x600-24Ts-POE+ Switches		32
Figure 14. SFP LEDs - x600-24 Port Switch		33
Figure 15. SFP LEDs - x600-48 Port Switch		34
Figure 16. XFP LEDs on x600-24Ts/XP and x600-48Ts/XP Switches		34
Figure 17. System STATUS LEDs		36
Figure 18. Non PoE Switch STACK LEDs		37
Figure 19. x600-24Ts-POE and x600-24Ts-POE+ STACK LEDs		37
Figure 20.	Secure Digital Slot LED	39
Figure 21. AT-RPS3204 Redundant Power Supply Unit		46
Figure 22.	AT-LBM Module installed in x600-48Ts/XP Expansion Slot	47
Figure 23. VCS Stacking Module (AT-StackXG)		48
Figure 24.	Back-to-Back Topology (x600 Switches)	53
Figure 25. VCS Ring Topology Using x600 Switches		54
Figure 26.	Resiliency link connecting to switch ports over the ResiliencyLink VLAN	56
Figure 27.	Resiliency link connecting to switch ports over the ResiliencyLink VLAN using a network hub	56
Figure 28. STACK and STATUS LEDs		60
Figure 29.	Power Cord Retaining Clip	70
Figure 30.	Inserting the Retaining Clip into the Retaining Bracket	70
Figure 31. Removing the Feet		71
Figure 32.	Attaching Rack-Mount Brackets	71
Figure 33.	Mounting the Switch in a Rack	72
Figure 34.	Resetting the Switch	73
Figure 35. VC Stacking (AT-StackXG) Module		74
Figure 36.	Removing the Blank Panel from the Expansion Slot	75
Figure 37.	Installing the AT-StackXG Stacking Module	76
Figure 38. Securing the AT-StackXG Stacking Module		76
Figure 39.	Removing the Plastic Protector	77
Figure 40. Removing a Dust Plug from an SFP Slot		82
Figure 41.	Installing an SFP Transceiver	83
Figure 42. Positioning Handles on the x600-24Ts and x600-24Ts/XP Switches		83
Figure 43. Positioning SFP Handles on the x600-48Ts and x600-48Ts/XP Switches		84
Figure 44. Removing an XFP Dust Plug		85
Figure 45.	Installing an XFP Transceiver	85
Figure 46.	Power Cord Retaining Clip in the Up Position	88
Figure 47. Connecting the AC Power Cord		88
Figure 48. Connecting the Management Cable to the RJ-45 Terminal Port on the Switch		89
Figure 49. RJ-45 Connector and Port Pin Layout		106
Figure 50. AT-RPS310417-Pin Connector Layout		108
Figure 51. AT-RPS320421-pinD-combo Connector and Port Pin Layout		110

7