Chapter 2: Virtual Chassis Stacking
Resiliency Link Configurations via Switch Ports
Two resiliency-link configurations that connect to switch ports are shown below:Figure 26 shows the resiliency link connecting in a ring topology, whilst Figure 27 shows the resiliency link connecting to its switch ports via a network hub. In both configurations, the resiliency link connections are made using the ResiliencyLink VLAN and attaching the switch ports to the VLAN. For more information on using the resiliency link commands go to the Software Reference for the x600 Series Switches which can be found at www.alliedtelesis.com. The specific commands are the STACK RESILIENCYLINK command on page 86.27 and the SWITCHPORT RESILIENCYLINK command on page 86.30.
Stack Resiliency Link - Connecting to Switch Ports
x600-24Ts | x600-24Ts |
x600-24Ts | x600-24Ts |
Stacking Links
ResiliencyLink VLAN
Figure 26. Resiliency link connecting to switch ports over the
ResiliencyLink VLAN
| Network Hub |
| Resiliency Links |
| to Switch Ports |
x600-24Ts | x600-24Ts |
x600-24Ts | x600-24Ts |
| Stacking Links |
Figure 27. Resiliency link connecting to switch ports over the
ResiliencyLink VLAN using a network hub
