Allied Telesis X600-24TS, x600-48Ts, x600-24Ts/XP manual Securing the AT-StackXG Stacking Module

Chapter 3: Installing the Hardware

Caution

Do not force AT-StackXG module into place. Doing so may damage the connector pins on the backplane inside the chassis. If there is resistance, remove the module and reinsert it after verifying that the edges of the card are properly aligned in the guides in the chassis’ module slot.

A
AT--
LXSta
	44CPUCVRckXG
	Stack
	Port 1
	Stack	1242
		Port 2

Figure 37. Installing the AT-StackXG Stacking Module

4.Secure AT-StackXG module to the chassis by tightening the two captive screws with a cross-head screwdriver.

-	A
	LX44CPAT-S
		UCVRtackXG
		Stack Po
		rt 1
		Sta
		ck Po
		rt 2
		1243

Figure 38. Securing the AT-StackXG Stacking Module

76