HCE-C107D Operation (Optional)
When the optional rearview camera
•Be sure to set “Camera IN” to DIRECT before using the rearview camera
Switching the Rear Camera Screen (Optional)
The rear view video will be displayed for the two situations as below.
Displaying the rear view video while the car is in reverse.
1 Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in reverse.
2 If you shift the gear lever to a position other than reverse (R), the monitor returns to the previous screen.
•Be sure to also check behind the car visually. Use the camera image to assist in showing conditions behind the car.
•This function is effective when the reverse wire is properly connected.
Displaying the rear view video manually
Select “Camera” in mode switching screen, and the rearview image from
Navigation System (Optional)
Switching the Navigation Screen (Optional)
If an optional Alpine Navigation System is connected to the
•Be sure to set “NAV. IN” to ON before using the navigation, Refer to “Setting the Navigation Mode” on page 20.
Press 
/VISUAL.
The Navigation screen is displayed.
Pressing again will return to Audio/Visual mode.
The operation is possible with the supplied navigation remote control.
For navigation operation, refer to the Owner’s Manual of the navigator.
•The Navigation mode can also be activated by selecting “Navigation” in mode switching screen. For details, refer to the step 2 of “Recalling the Source” on page 8.
•If the Navigation mode menu is not displayed on the main menu screen, select ON in “Setting the Navigation Mode” on page 20.
•When the Navigation System is on and in guidance mode, the voice prompts and navigation map interrupts the current audio source.
