Alpine iXA-W407 owner manual 63-EN, Indication for iPod Mode, Bluetooth mode

Indication for iPod Mode

CURRENT ERROR

•Abnormal current is run to the USB connector device. - Attempt to connect another iPhone/iPod.

USB DEVICE ERROR

•An iPhone/iPod that is not supported by the unit is connected.

-Connect an iPhone/iPod that is supported by the unit.

-Reset the iPod.

NO USB DEVICE

•An iPhone/iPod is not connected.

-Make sure the iPhone/iPod is correctly connected and the cable is not excessively bent.

•There are no songs in the iPhone/iPod.

-Download songs to the iPhone/iPod and connect to the iXA-W407.

•Communication error.

-Turn the ignition key off, and then set to ON again.

-Check the display by reconnecting between the iPhone/iPod and the unit, using the iPhone/iPod cable.

•Caused by the iPhone/iPod Software Version not being compatible with this unit.

-Update the iPhone/iPod Software Version to be compatible with this unit.

•The iPhone/iPod is not verified.

-Change another iPhone/iPod.

Indication for USB memory/Portable audio player mode

USB DEVICE ERROR

•A USB device/Portable audio player that is not supported by the unit is connected.

-Attempt to connect another USB memory/Portable audio player.

NO USB DEVICE

•A USB memory/Portable audio player is not connected.

-Make sure the USB memory device/Portable audio player is correctly connected and the cable of Portable audio player is not excessively bent.

•There are no songs in the USB memory/Portable audio player.

-Download songs to the USB memory/Portable audio player and connect to this unit.

•A sampling rate/bit rate not supported by the unit is used.

-Use a sampling rate/bit rate that is supported by the unit.

•A copy-protected WMA file was played back.

-You can only play back non-copy-protected files.

-Make sure the Portable audio player is set to MTP.

•Communication error.

-Turn the ignition key off, and then set to ON again.

-Check the display by reconnecting between the USB memory/ Portable audio player and the unit.

•Caused by the Portable audio player Software Version not being compatible with this unit.

-Update the Portable audio player Software Version to be compatible with this unit.

CURRENT ERROR

•Abnormal current is run to the USB connector device. USB memory/Portable audio player is a malfunction or it is shorted.

- Connect another USB memory/Portable audio player.

•The Portable audio player is not verified. - Change another Portable audio player.

BLUETOOTH mode

•The BLUETOOTH device is not connected. - Connect the BLUETOOTH device.

63-EN