Alpine iXA-W407 owner manual 72-EN, When Connecting External Equipment

When Connecting External Equipment

To Video Output terminal

Back-up camera (Sold Separately)

To Audio Input terminal

Rear monitor (Sold Separately)

To Video Input terminal

To Video Output terminal

TV Tuner or VCR (Sold Separately)

To Audio Output terminal

To Video Output terminal

TV Tuner or VCR (Sold Separately)

To Audio Output terminal

Rear camera (sold separately) HCE-C107D

(White/Pink) M.CONT M.CONT (White/Pink)

* Connect this to the touch panel-compatible rear monitor.

(White/Brown)	REMOTE OUT 1
(White/Brown)	REMOTE OUT 2
(White/Brown)	REMOTE IN
(Orange/White)	REVERSE

System Switches

When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. When no device is connected, leave the switches in the NORM position.

•Do not make the two switches to different settings.

•Be sure to turn the power off to the unit before changing the switch position.

24 PIN Pre-out/AUX I/O Connector

Video/Audio Output Connectors (AUX OUTPUT)

Use when connecting an optional monitor etc.

Video/Audio Input Connectors (AUX INPUT)

Video/Audio Input Connectors (AUX INPUT)

Camera extension cable (Included with Rear Camera (HCE-C107D))

Monitor Control Lead (White/Pink)

Connect this to the Monitor Control Lead of the touch panel- compatible rear monitor.

Remote Control Output Lead (White/Brown)

REMOTE IN 1	(White/Brown)
REMOTE IN 2	(White/Brown)
REMOTE OUT	(White/Brown)

Use only when back-up camera is connected.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.

Remote Control Input Lead (White/Brown)

Reverse Lead (Orange/White)

Use only when a back-up camera is connected. Connect to the plus side of the car’s reverse lamp. This lamp illuminates when the transmission is shifted into reverse (R).

With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R).

RCA Extension Cable (Sold Separately)

CAMERA Input RCA Connector

Use when connecting a back-up camera with RCA Output Connector.

Direct CAMERA Input Connector

Use when connecting a special rearview camera HCE-C107D is connected.

Remote IN/OUT Connector

Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.

72-EN