Setting the bass level
You can boost or cut bass frequencies. (The audio source level can be adjusted.)
Setting item: LEVEL
Setting level:
Setting the slope
Select the frequency you want to set within the available range. (Common to each audio source.)
Setting item: SLOPE
Setting range: 0.50 
0.75 
1.00 
1.25
Setting the bass centre frequency
The displayed bass frequency is boosted. (Common to each audio source.)
Setting item: FREQUENCY
Setting range: 60Hz 
80Hz 
100Hz 
120Hz
•Adjustment cannot be performed when an external audio processor is connected and DEFEAT is set to ON.
Rear Entertainment Function
The rear entertainment function independently routes different sources to the front and the rear inside a car. For example, while listening to the radio or other audio source in the front, DVD can be enjoyed in the rear with the optional rear monitor and headphones.
To connect the rear monitor, the optional expansion box
1 Press and hold TA/RTN/SETUP for at least 2 seconds.
The SETUP screen is displayed.
2 Press the joystick up or down to select REAR SELECT, then press the joystick right.
The REAR SELECT screen is displayed.
Display Example for REAR SELECT screen
Adjusting the Subwoofer Level
Adjust the subwoofer output.
Setting item: SUBW LEVEL
Setting range: 0 to 15
•The level adjustment becomes available when ON is set in “Subwoofer On and Off” (page 19).
Turning Loudness ON or OFF
Loudness introduces a special low- and
Setting item: LOUDNESS
Setting range: ON / OFF
•Adjustment cannot be performed when an external audio processor is connected and DEFEAT is set to ON.
Turning Defeat ON or OFF
By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.
Setting item: DEFEAT
Setting range: ON / OFF
Adjusting Volume of GUIDE Voice
The volume level of the speaker input voice and the navigation interrupt voice output from the external audio processor is adjusted.
Setting item: GUIDE MIX LV
*Setting range: 0 to 15
*Make sure to adjust this setting to 15. Otherwise operation may not be correctly performed.
•Adjust the speaker input voice interruption level in “Adjusting the Speaker Input Voice Interruption Level” (page 17)and “Navigation Audio Interruption Volume Adjustment” (page 18).
•This function cannot be used when
3 Press the joystick up or down to select the desired external monitor.
4 Press the joystick left or right to set the desired video source (external input).
5 Press TA/RTN/SETUP to return to the previous screen. Press TA/RTN/SETUP repeatedly to return to the main source screen displayed before starting the setup operation.
•To cancel the rear entertainment function, set to OFF.
•When the “Setting the AUX Mode” (page 18) is set to OFF, the auxiliary source is not displayed.
•VISUALIZER (VISUAL.) is not displayed when the setting of “Setting the VISUALIZER Mode Display” (page 18) is turned off.
