DVD/Video CD Operation (Optional)

Joystick

Display example for DVD main operation screen

Playing DVD/Video CD

Basic operations of an Alpine DVD player/Changer can be done from the unit's supplied commander. Refer to the Owner's Manual of the connected DVD player/Changer.

When using an Alpine DVD Player/Changer, some of the commander functions may not be recognized. This varies from disc to disc. If the supplied VPA-B222R commander is not controlling a particular function of the DVD being played, please use the remote control that came with the DVD player.

WARNING

It is dangerous for the driver to watch the DVD/TV/ Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.

Install the VPA-B222R correctly so that the driver cannot watch DVD/TV/Video unless the vehicle is stopped and the emergency brake is applied.

If the VPA-B222R is not installed correctly, the driver will be able to watch the DVD/TV/Video while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured.

To display the DVD mode screen

If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY.

Caution

Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

If you try to perform an invalid operation (based on

the type of disc being played), the following mark is displayed on the monitor screen:

1Press SOURCE/POWER.

The source selection screen is displayed.

2Press the joystick up or down to select the DVD mode (EXT.DVD, DVD CHANGER or etc.), then press / /ENTER.

Playback starts.

If a menu screen appears

On DVDs and Video CDs with playback control (PBC), menu screens may appear automatically. The DVD menu can be controlled by the commander supplied with the unit. If this happens, perform the operation described below to start playback.

Press the joystick up, down, left or right to select an item, then press and hold / /ENTER for at least 2 seconds.

Press TA/RTN/SETUP to return to the previous screen.

The video CD menu screen cannot be controlled from the commander supplied with the unit.

Depending on the disc, the menu screen may be recalled from the

FUNCTION screen. Select MENU on the FUNCTION screen and

press / /ENTER to recall the menu, after displaying the FUNCTION screen by pressing and holding /MENU/FUNC. for at least 2 seconds.

Playing Still Frames (Pausing)

1 During playback, press / /ENTER.

2 Press / /ENTER to resume playback.

22-EN

Page 23
Image 23
Alpine VPA-B222R owner manual DVD/Video CD Operation Optional, Playing DVD/Video CD, Playing Still Frames Pausing