Alpine VPA-B222R owner manual Specifications, 47-EN, Indication for iPod Mode, Commander

Indication for iPod Mode

•The iPod is not connected.

-Make sure the iPod is correctly connected. Make sure the cable is not bent excessively.

•The iPod’s battery remains low.

-Refer to the iPod’s documentation and charge the battery.

•There are no songs in the iPod.

-Download songs to the iPod and connect to the VPA-B222R.

•Communication error

-Turn the ignition key off, and then set to ACC or ON again.

-Check the display by reconnecting between the iPod and the adapter, using the iPod cable.

•Caused by the iPod Software Version not being compatible with this unit.

-Update the iPod Software Version to be compatible with this unit.

Specifications

FM TUNER SECTION
Tuning Range	87.5 – 108.0 MHz
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
MW TUNER SECTION
Tuning Range	531 – 1,602 kHz
Sensitivity (IEC Standard)	25.1 µV/28 dB
LW TUNER SECTION
Tuning Range	153 – 281 kHz
Sensitivity (IEC Standard)	31.6 µV/30 dB
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Operating temperature	+32 °F to +113 °F
	(0 °C to + 45 °C)
Maximum Power Output	50 W × 4
Output Voltage	2,000 mV/10k ohms
Bass	+20/–14 dB at 100 Hz
Treble	±14 dB at 10 kHz
Weight	1.2 kg
	(2 lbs. 10 oz)
Audio output level
Preout (Front, Rear):	2V/10k ohms (max.)
Preout (Subwoofer):	2V/10k ohms (max.)
Auxout:	1.2V/10k ohms
Ai-NET:	850 mV
CHASSIS SIZE
Width	275 mm (10-13/16")
Height	40 mm (1-9/16")
Depth	170 mm (6-3/4")
Commander
Width	53 mm (2-1/16")
Height	29 mm (1-1/8")
Depth	87 mm (3-7/16")
Weight	50 g (1.8 oz) (holder excluded)

47-EN