ISO Antenna Plug
ISO Antenna Converter Plug (sold separately) Antenna Extension Cable (Included)
Right Front (+) Speaker Input Lead (Grey) Right Front
Left Front
Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
Guide Control Lead (White/Green)
If an external audio processor is connected, connect this to the guide control lead.
Illumination Lead (Orange)
This lead may be connected to the vehicle's instrument cluster illumination lead. This will allow the backlighting of the commander to dim whenever the vehicle's lights are turned on.
Power Supply Connector
Steering Remote Control Interface Connector
To steering remote control interface box.
Remote Control Eye Jack
Connect this to the remote control sensor unit.
Factory System Input Terminal
Navigation Input (RGB Input) Terminal
Connect this to the RGB output terminal of the Navigation System.
Display Output (RGB Output) Terminal
Connect a 13P RGB terminal equipped monitor using the RGB cable supplied with the unit.
Video Output Terminal
Connect this to the external front monitor using the RCA extension cable supplied with the unit.
Subwoofer output Terminal
Connect the input lead of an amplifier for the subwoofer to this terminal.
Rear output Terminal
Use when connecting an amplifier or equalizer.
Front output Terminal
Use when connecting an amplifier or equalizer.
Ai-NET Connector
Connect this to the output or input connector of other product (CD changer, Equalizer, iPod adapter*, etc.) equipped with
*If you connect to iPod, you need the optional adapter
Guide Output Terminal
If an external audio processor is connected, outputs the navigation interrupt voice signal that is input from the Alpine navigation system, or the speaker input terminal.
Commander Terminal
AV Select Connector
When this connector is connected to the optional expansion box
AUX Input Terminals
If these terminals are connected to the optional expansion box
Antenna Receptacle
ISO Connector (Included)
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
Remote
Connect this lead to the remote
To amplifier or equalizer
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna, if applicable.
Audio Interrupt In Lead (Pink/Black)
To vehicle phone
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the
Connect this lead to the parking brake lead powered when parking brake is engaged.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s battery.
Fuse Holder (10A)
Right Front (+) Speaker Output Lead (Grey) Right Front
Left Rear (+) Speaker Output Lead (Green)
Left Rear
System Switch
When connecting an equalizer or divider using
•Be sure to turn the power off on the unit before changing the switch position.
ALPINE/OTHER switching button
Set to “ALPINE” for normal use.
Set to “OTHER” when connecting optional display interface box.
NTSC/PAL switching button
Switch if necessary. Effective only when the ALPINE/OTHER switching button is set to OTHER.
Commander (Included)
