UPS Display: User Configuration Screens
Password Settings screen
Some of the UPS Display screens (primarily configuration screens) are protected by a password.
On installation the password is set to “apc.” For security reasons, it is recommended to change the password.
Normal
User Configuration
5.39 PM
Password Settings
Enter current password
Enter new password Re- enter new password
xxxx
xxxxxxxx
xxxxxxxx
Apply Changes
Page 2 of 5
•Enter current password: Enter the current password.
•Enter new password: Enter the new password.
•
If you forget the password, contact your APC service representative who will be able to help you.
Note
Modbus Settings screen
The Modbus Settings screen allows monitoring of the UPS system by a Building Management System (BMS).
Normal
Normal
User Configuration
5.39 PM
Modbus Settings
BMS modbus RTU address
Communication Settings
Baud rate
Parity
xxxx
xxxx |
xxxx |
Apply Changes
Page 3 of 5
Symmetra® MW with Internal Bypass Static Switch - User Guide - | 21 |
