American Power Conversion Bypass Static manual APC Symmetra MW Remote Display

APC Symmetra MW Remote Display

The read-only display screens can be accessed via an Internet Browser by typing the IP address of the Symmetra MW display into the browser’s address field. The remote display feature provides a subset of the Symmetra MW display screens. Configuration of the Symmetra MW or the display through the remote display is not supported.

The remote display feature requires Microsoft Internet Explorer 6 SP1 or greater. For best results we recommend that the Sun JVM version 1.4.2_05 or greater be installed. This is available from Sun’s website.

The Netscape browser is not supported.

The following screens can be accessed during a remote session:

•UPS Summary screen

•Active alarms screen

•Event log screen

•Input Summary screens

•Output Summary screens

•Battery Summary screens

•Bypass Summary screens

Operation/configuration must be done at the UPS.

Note

The event log screen can be accessed through the Operation screen. Only the 50 most recent events in the Event Log screen can be downloaded.

Note

Network settings must be configured before the remote display feature can be used.

Note

Symmetra® MW with Internal Bypass Static Switch - User Guide - 990-1756A-001 43