American Power Conversion PD150L6F, PD150G6F manual Top-level status screens, Top-level menu screen

PDU Display Interface: Overview

Top-level status screens

After system start-up, the display interface displays a brief start-up screen and then scrolls automatically and continuously through four screens of basic status information. Press the Up and Down arrow keys to interrupt the automatic scrolling if you wish to view a specific status screen.

Volts In		Volts Out
L1-2: 000		L1: 000
L2-3: 000		L2: 000
L3-1: 000		L3: 000
Total Output Loading
kW:	000	PF: 000
kVA:	000	%LD: 000
Freq:	00.0

Load Current

L1: 000 Neut:000

L2: 000

L3: 000

No Active Alarms

System Date/TIme:

Jun-24 2003 07:58

Top-level menu screen

On any top-level status screen, press the ENTER key to open the top-level menu screen.

Load-Meter	Alarms
Volt-Meter	Panel
Contacts	Config
Breakers	Help

If the display interface is inactive for the time specified as the Time-outsetting, it reverts to the initial basic monitoring screens.

Note

For descriptions of the top-level menu choices, see the individual sections starting on page 16.

Navigating through screens

To open any screen, press the Up and Down arrow keys until the selector arrow (rests next to your desired selection. Press the ENTER key to view the selected screen.

Load-Meter	Alarms
-Meter	Panel
Breakers	Config
	Help

Contacts In: 02of04

Name: User Switch #2

Normal: Open

Open



When configuring settings, press the Up and Down arrow keys until the selector arrow ( rests next to the setting you want to change, and press the ENTER key. If the setting is a list of choices, an input arrow (will appear next to the setting. Press the Up and Down arrow keys until your desired change is listed. Press the ENTER key to select the setting.

Contacts In: 02of04

Name: User Switch #2

Normal:Open

Status: Open



14 150kW InfraStruXure PDU—Operation and Configuration