American Power Conversion PD150G6F, PD150L6F manual Electrical Config, Input Config, Output Config

PDU Display Interface: Config Screen

Electrical Config

This option of the Config screen displays information about the electrical service that provides input to the InfraStruXure PDU. All of the values displayed on this screen are set at the factory. Use this information when viewing and setting alarms.

Input Config	Configure the following items:
	• Main Input: The voltage from the power source coming into
		the PDU main input switch.
		• 3W: 3-phase Delta, measured line-to-line
		• 4W: 3-phase WYE, measured line-to-neutral
	• Transformer: Indicates whether the InfraStruXure PDU has
		a transformer.
Output Config	Configure the following items:
	•	Panel Voltage: The nominal voltage of the distribution panels
		supplying power to the load equipment. (This is measured
		line-to-neutral.)
	•	Panel Breaker: The rating, in amps, of the circuit breaker
		feeding the distribution panels.

Manufacturer Data

Use this option of the Config screen to display a scrollable list containing information about the InfraStruXure PDU. This information is useful when requesting service or product updates. The following information is displayed:

•Manufacturer Name

•Date of Manufacture

•Date of Calibration

•Hardware Revision

•Firmware Revision (for PDU Monitoring and Metering)

•Serial Number

•Model Number

150kW InfraStruXure PDU—Operation and Configuration 29