Overview: InfraStruXure PDU

The Display port (RJ-45) connects the PDU monitoring unit to the display interface.

The Power LED indicates whether the monitoring unit is receiving power.

Use the Console port (DB-9) to connect a laptop computer to the monitoring unit using an appropriate communication cable. This port is used to configure items relating to servicing the PDU.

The branch current monitoring boards connect to the Branch Current Monitor ports (RJ-11). These ports are on the side of the PDU monitoring unit, and are labeled on the

Note face of the unit. Each port corresponds to a section of circuit breakers on the PDU distribution circuit breaker panel: upper left = [01..41]; upper right = [02..42]; lower

left = [43..83]; lower right = [44..84].

150kW InfraStruXure PDU—Operation and Configuration

11

Page 19
Image 19
American Power Conversion PD150G6F, PD150L6F manual Left = 43..83 lower right =