AMX PTM-D15 manual L A N D M A R K C A R D F R A M E S, L A N D M A R K M A S T E R C A R D S

L A N D M A R K

L A N D M A R K C A R D F R A M E S

PLB-CF10

Cardframe with 10 Card Slots and 16 Port Hub

FG993

FEATURES

•Holds up to 10 control cards

•Acts as system master with Master Control Card

•Operates interactively over high-speed Ethernet connection to system PC with PHAST software and PLC-MCU Card

•Distributes PHASTLink from 15-port PHASTLink data hub

CARD SLOTS

•10 rear-access slots

HUB LINK

•2 RJ-45 ports to hubs and Cardframes

PHASTLINK

•15 RJ-45 PHASTLink ports

DIP SWITCH

•Sets Cardframe device number DIMENSIONS (HWD): 5.56" x 17.13" x 15.25" (141.2 mm x 435.1 mm x 387.4 mm)

WEIGHT: 19.8 lbs (9.0 kg) (w/o cards)

POWER: 110/220 VAC, 50/60 Hz, 100 mA (w/o cards)

ACCESSORIES

•PM-RAC Rack-Mount Kit, requires 3 rack spaces (5.25")

PLB-CF2

Cardframe with 2 Slots

FG718

FEATURES

•Holds up to two control cards

•Acts as system master (with MCU card) or adds two control cards to an existing system

•Operates interactively over high-speed Ethernet connection to system PC with PHAST software (with MCU card)

•Distributes control from PHASTLink ports, supports up to 10 devices and one keypad in Master mode

CARD SLOTS

•Two rear-access slots

PHASTLINK

•Two RJ-45 ports

DIP SWITCH

•Sets Cardframe device number

LED INDICATORS:

•Red Link LED on front

•Red Power LED on front

•Green Data LED on back

•Red DIAG (diagnostic) LED on back

DIMENSIONS (HWD): 2.0" x 6.3" x 13.5" (50 mm x 159 mm x 336 mm)

WEIGHT: 3.5 lbs (1.6 kg) w/o card

POWER: 40 mA w/o cards, 1.5 A 12 VDC power supply included

ACCESSORIES

•PM-RAC2 PLB-CF2 Rack-Mount Kit (holds 2)

For more information about AMX products and services visit www.amx.com

11-03

L A N D M A R K M A S T E R C A R D S

PLC-MCU4

4MB Master Control Card

FG754

APPLICATION

•Master system processing and memory one required per system

PHASTLAN

•RJ-45 Ethernet 10baseT port to system PC

MEMORY

•4MB Flash

•4MB SRAM

POWER: 480 mA

L A N D M A R K C O N T R O L C A R D S

PLC-AMX

AMX Emulation Card

FG0751

APPLICATION

•Link up to 255 Axcess devices

AXLINK

•4-pin AXLink data/power bus

PROGRAM

•9-pin male D-Sub programming connector

POWER

•130 mA (card itself, additional power may be needed for devices)

PLC-IN7

7-Contact Input Card

FG0741

APPLICATION

•Sense closures or TTL voltage changes

INPUTS

•1-7: 7 inputs, closure or 0–5 VDC voltage change

POWER

•+12 and +5 VDC power for accessories, 1 A max

WIRING

•16-pin screw terminal

POWER

•25 mA (May need additional power to operate connected devices)

PLC-IRIN

IR Input Card

FG0729

APPLICATION

•Accepts Landmark IR commands from up to 3 sensors

IR IN 1–3

•Three inputs for industry-standard IR sensors

WIRING

•Three 3-pin screw terminals for sensor data and power

POWER

•45 mA

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.