AMX PTM-D15 manual D A T A C O N T R O L L E R S, AXB-232++, Axb-Dtmf+, AXB-DMX512, AXB-IRS4

D A T A C O N T R O L L E R S

AXB-232++

RS-232/422 Interface (enhanced functionality)

FG5761-10

While this controller can serve as a conventional RS-232/422 control port, it is also able to run its own Axcess application program – an exclusive AMX product feature. Source specific programming, such as video switchers, laserdisc players and video codecs, can be handled by the AXB-232++ to deliver a modular solution for system programming.

CONTROL PORT

•RS-232/422/485 port (300-115,200 baud), XON/XOFF, CTS/RTS

BUFFERS

•1,000 byte serial input buffer; 1,000 byte AXLink buffer

INDICATORS

•Three status LEDs indicate transmit, receive, and AXLink

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.51" x 5.55" x 5.45" (38 mm x 140 mm x 140 mm)

WEIGHT: 1.1 lbs (499 g)

OPTIONS

•AC-RK Accessory Rack Kit

•CC-232 Control Cable

AXB-DTMF+

DTMF Interface

FG946

The AXB-DTMF+ provides a compete telephone control interface for AMX systems. In addition to the transmission and reception of DTMF tones, the unit can detect whether the line or extension phone is off-hook, recognize distinctive ring patterns, check for incoming calls, and monitor Caller ID data.

CONTROL PORTS

•Phone line RJ-11 jack, extension line RJ-11 jack

•RCA unbalanced line-level audio in and out with input level adjustment

INCLUDES

•Front-panel setup switches and status LEDs

•Micro-jumpers for auto-answer mode and line type

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.51" x 5.55" x 6.45" (38.4 mm x 141 mm x 163.8 mm)

WEIGHT: 1 lb (454 g)

OPTIONS

•AC-RK Accessory Rack Kit

AXB-DMX512

DMX512 Interface

FG5927

The AXB-DMX512 creates a bi-directional DMX512-to-AXLink connection, transmitting and receiving up to 512 DMX channels. Onboard processing and memory create as many as 96 channel groups, eight faders, and 72 presets (284 by adding extended memory), as well as soft-patch channels. A DMX lighting board can operate in tandem with the AXB-DMX512, generate levels for storing presets, or bypass the AXB-DMX512 for direct control of channels.

CONTROL PORTS

•DMX512 transmit and receive

INCLUDES

•Front-panel setup switches and status LEDs

•Internal jumper select AXLink or RS-232 operation

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.51" x 5.55" x 5.45" (38.4 mm x 141 mm x 138.4 mm)

WEIGHT: 1.1 lbs (499 g)

OPTIONS

•AC-RK Accessory Rack Kit

AXB-IRS4

IR/Serial Interface, 4 Ports

FG5914

The AXB-IRS4 operates as an AXLink bus device or as an independent RS-232- to-IR interface. The four IR ports can be set up for IR or wired serial operation. Any two ports can send commands at the same time; internal firmware stacks any remaining IR pulses and executes them in sequence. Each unit emulates four AXLink devices.

CONTROL PORTS

•Four IR/serial ports

•One AXLink or one RS-232 port (300–19,200 baud) to receive external control commands

INCLUDES

•Battery-backed IR memory, up to 200 commands per port

•Front-panel setup switches and status LEDs

•Two CC-IRC or CC-SER emitters

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)

WEIGHT: 1.1 lbs (499 g)

OPTIONS

•AC-RK Accessory Rack Kit

For more information about AMX products and services visit www.amx.com	CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
11-03	AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.