AMX PTM-D15 A U D I O C O N T R O L C A R D S, A X C E S S C O N T A C T C L O S U R E C A R D S

A X C E S S C O N T A C T C L O S U R E C A R D S

AXC-REL8

8 Relay Card

FG715

Devices that require a simple momentary or latching contact closure can be controlled with the AXC-REL8 Universal Eight Relay Card. This card can operate up to 8 relay-controlled functions, and cards can be linked together to allow a larger number of functions. Adjacent relays on the card may be selectively commoned to reduce device wiring.

APPLICATION

•Universal relay control; eight relays per card

CONTROL PORTS

•Eight relays, normally open, rated at 750 mA, 28 VAC/24 VDC

INCLUDES

•Eight channel status LEDs

•Eight micro-jumpers connect commons between adjacent channels

•Eight micro-jumpers change relay contacts from normally open to normally closed

POWER REQUIREMENT: 150 mA @ 12 VDC

AXC-REL14

14 Relay Card

FG716

Devices that require a simple momentary or latching contact closure can be controlled with the AXC-REL14 Universal Fourteen Relay Card. This card operates up to 14 relay-controlled functions in a dual seven-relay configuration. Each section of seven relays on the AXC-REL14 are commoned and both sections may be commoned together.

APPLICATION

•Relay control; 14 relays per card, one group of 14 relays or two groups of 7 relays

CONTROL PORTS

•14 relays, normally open, rated at 750 mA, 28 VAC/24 VDC

•Each group of seven relays shares the same common

INCLUDES

•14 channel status LEDs

•One micro-jumper connects commons between groups 1-7 and 8-14

POWER REQUIREMENT: 150 mA @ 12 VDC

AXC-SAV

SAV Slide Projector Control Card (SAV series)

FG721

Kodak SAV series of 35mm slide projectors are very popular presentation devices in the international business community. The AXC-SAV Slide Card provides commands for forward, reverse, focus in, focus out and power.

Two additional relays, Aux 1 and Aux 2, are provided for optional control requirements. The power relay may be used with the AMX PC1 for 110 VAC applications of the AMX UPC20 for 110/220 VAC use.

APPLICATION

Relay control of Kodak SAV-style slide projector

CONTROL PORTS

Five relays for Forward, Reverse, Focus in, Focus out and Power on/off Two auxiliary relay channels for special applications

INCLUDES

Seven channel status LEDs

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

A U D I O C O N T R O L C A R D S

AXC-VOL

2-Channel Volume Control Card

FG755

The AXC-VOL 2-Channel Volume Control Card provides stereo or dual mono channel control and is programmable for up to 32 preset levels. Ramp speed is also programmable. To accommodate both professional and consumer devices, the card accepts either balanced or unbalanced audio connections. Output levels for each channel can be displayed on AMX Softwire Panels and/or Touch Panels for monitoring during operation.

APPLICATION

•Stereo or two-channel mono opto-isolated line-level audio level control

AUDIO PORTS

•Two line-level volume control channels, balanced or unbalanced operation

•0 to -72 dB attenuation, 128-step range, THD at less than 0.008[[[%]]]

•Nominal input level from -10 to +4 dBm

INCLUDES

•Two status LEDs for channel 1 or 2 level change

•Two micro-jumpers for 600 ohm termination

•Two potentiometers for audio gain adjustment

For more information about AMX products and services visit www.amx.com

11-03