AMX PTM-D15 manual C O L O R P A S S I V E T O U C H P A N E L S, AXD-CP4/A, AC-CP4A/WRB, CB-CP4/A

4 " C O L O R P A S S I V E T O U C H P A N E L S

AXD-CP4/A

4" Color Flush Mount Touch Panel with Audio

FG5921-20 Black

FG5921-21 Almond

FG5921-22 White

SCREEN RESOLUTION

•320x240 pixels (HV)

VIEWING ANGLE

•Horizontal viewing angle: -+50°

•Vertical viewing angle: -+50°

IR RECEPTION AREA

•45° up on the AXT (30° on the AXD) from the horizontal plane

•15° down on the AXT (30° on the AXD) from the horizontal plane

•40° right of the vertical plane (both AXD and AXT units)

•40° left of the vertical plane (both AXD and AXT units)

EXTERNAL BUTTONS

•Six interchangeable external pushbuttons. Pushbutton assignments can include the typical Device/Channel numbers, Flip to Page option and String/Macro. Buttons are used as interface tools that operate on-screen menus or turn On/Off the controlled equipment.

EXTERNAL LEDS

•External LEDs: six LEDs located alongside each external pushbutton. Independently operated and programmed.

BUTTONS

•Set of 18 changeable button caps consisting of: six blanks, two embossed with Up/Down arrows, and 10 engraved with standard icons. These buttons match the bezel coloring.

BUTTONS LABELS

•10 standard icon pre-printed buttons

•These buttons contain 10 icons covering the following functions: MENU, LIGHTS, AUDIO, VIDEO, ENVIRONMENT, SECURITY, INTERCOM, MUTE, DRAPES and POWER

LIGHT DETECTOR

•Photosensitive light detector for adjustment of the panel brightness.

MOTION SENSOR

•Proximity Infrared Detector to wake the panel when the panel is approached.

•Activation range: + 20° vertically from center and + 45° horizontally from center.

IR RECEIVER

•38 KHz, one-way IR reception (of AMX codes only)

MICROPHONE

•Used for audio conferencing applications (intercom functionality)

SPEAKERS

•Frequency response 450 Hz - 7 KHz

AXLINK/POWER

•4-pin 3.5 mm mini-phoenix connector for communication to the AMX Central Controller providing both data and power

AUDIO

•8-pin 3.5 mm mini-phoenix connector for audio input/output

PROGRAMMING PORT

•2.5 mm stereo female conductor jack (side mounted)

POWER CONSUMPTION

•770 mA @ 12 VDC

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

OPERATING ENVIRONMENT

•Indoor operation at temperatures between 10° C (50° F) to 40° C (104° F) and a humidity range of 5% to 90% RH (non-condensing)

MEMORY

•512KB of SRAM and 2MB of Flash for a total memory of 2.5MB (2MB is available for buttons, icons, bitmaps, and fonts).

ENCLOSURE

•BackBox with black matte finish Detachable front panel bezel are available in White (FG5921-22), Black (FG5921-20) and Almond (FG5921-21)

DIMENSIONS

•Housing: 4.60" x 5.34" x 1.87" (11.68 cm x 13.56 cm x 4.75 cm)

WEIGHT

•2.23 lbs. (1.02 kg)

AC-CP4A/WRB

Water Resistant Bezel Set for AXD-CP4/A

FG5921-24

Introducing the water-resistant bezels for AXD-CP4/A - AC-CP4A/WRB. Set includes all three colors- white, black, and almond - covered with a thin transparent water-resistant film to protect the bezel including the touch screen, sensor lens, and pushbuttons. It also includes a rubber-foam gasket to "seal" a potential gap between the bezel and the wall.

CB-CP4/A

Conduit Box for AXD-CP4/A

FG033-10

CB-CP4/A is an optional Conduit/Wallbox for AXD-CP4/A Color Flush Mount Touch Panels. It represents a metallic housing that is installed onto a beam in a pre-wall setting. The Touch Panel is housed in a default back box that ships with each unit that is not removed in the conduit box installation method.

The CB-CP4/A Conduit/Wallbox package includes drywall clips and screws for installation to studs during the construction phase.

DIMENSIONS:

•4.09" x 5.51" x 3.40" (10.39 cm x 13.99 cm x 8.64 cm)

For more information about AMX products and services visit www.amx.com

11-03