AMX PTM-D15 manual C U S T O M P A N E L I N T E R F A C E S, NXP-CPI16, AXP-AI8, FG783, Axp-Cpi

C U S T O M P A N E L I N T E R F A C E S

NXP-CPI16

NetLinx Custom Panel Interface

FG410

The NXP-CPI16 NetLinx Custom Panel Interface is a versatile device, useful for both custom panel and contact-closure applications. It will directly interface with AMX Touch Panels and components designed for integration with Axcess Control Systems. Two 20-pin headers provide ribbon cable wiring or direct- connect insertion to circuit boards – one provides inputs for up to 16 closures and the other drives feedback outputs for LEDs. Under software control, the LED outputs can act as drivers to 8-segment bargraphs or operate as discrete outputs for feedback.

In addition, the NXC-CPI16 also provides two quadrature inputs to control variable levels such as volume or lights. Able to read digital signals from mechanical or optical rotary encoders, the response can be adjusted under software control.

FEATURES:

•Integrates custom panels with 16 closure inputs and 16 LED outputs, pin-for-pin compatible with panels designed for AXC-CPI16

•Operates as low-cost closure

•Acts as driver for up to two 8-segment LED bargraphs, each bargraph uses eight of the 16 LED outputs

•Allows precision digital control of up to two levels from quadrature inputs

•Accepts mechanical or optical rotary encoders

•Offers programmable level response, provides software-driven performance adjustment, and switchable coarse/fine level control

INPUT CONNECTORS

•Indicator power: Two-pin 3.5 mm captive wire

•I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs activated with GND or TTL Low (< 0.8 V)). Open collector outputs (0-28 VDC). Inputs are sampled approximately every 10 msec.

•Rotary Encoder inputs: Two quadrature inputs on a 2x3 header (6-pin), two encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and a GND pin

ICSNET

•Two RJ-45 connectors for ICSNet connection

ID BUTTON

•Generates an event from the AXC-CPI16 to allow you to assign new device numbers using the ID mode in NetLinx Studio Software

LED

•ICSP status indicator (green)

OPEN COLLECTOR OUTPUTS

•16-open collector outputs, acting as a switch to ground, up to 100 mA. Outputs can be connected to voltages ranging between 0 and + 28 V. Each output is updated every 10 msec

DIMENSIONS (HWD):

•2.75" x 1.85" x 1.40" (6.99 cm x 4.70 cm x 3.56 cm)

WEIGHT:

•8.10 oz. (229.63 g)

AXP-AI8

Analog 8-Input Board

FG783

APPLICATION:

•PC board receives joystick or potentiometer control commands

CONTROL PORTS:

•Eight analog inputs, 10-bit resolution, resistance (5K-100K) or DC (0-5 V)

INCLUDES: Reference potentiometers, 20-pin ribbon cable, 6.0' (1.8 m)

DIMENSIONS (HWD): 3.5" x 2.8" x 0.9" (89 mm x 69 mm x 23 mm)

WEIGHT: 4.2 oz (118 g), including ribbon cable

AXP-CPI

Custom Panel Interface

FG5775-01

APPLICATION:

•Large custom panel, up to 64 pushbuttons; incandescent switch lamps

CONTROL PORTS:

•64 polled lamp LED/switch points; two commons for lamp, LED, and switch Drivers for four bargraphs

INCLUDES: Adjustable lamp glow level, 64-pin ribbon cable, 6.0' (1.8 m)

ENCLOSURE: Molded black matte plastic for free-standing use

DIMENSIONS (HWD): 1.5" x 5.0" x 5.3" (38 mm x 127 mm x 133 mm)

WEIGHT: 18 oz (510 g), including ribbon cable

AXP-CPI16

Custom Panel Interface Board

FG5780-10

APPLICATION:

•PC board for small custom panel, relay and input interface

CONTROL PORTS:

•16 switch inputs, 16 outputs, switch to ground;

100 mA each for lamps, LEDs, or relays

INCLUDES: Two 20-pin headers, two 20-pin ribbon cables, 6.0' (1.8 m)

DIMENSIONS (HWD): 1.8" x 2.8" x 0.9" (46 mm x 69 mm x 23 mm)

WEIGHT: 2.9 oz (82 g), including ribbon cable

For more information about AMX products and services visit www.amx.com	CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
11-03	AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.