AMX PTM-D15 manual Axd-Mcp/Pb, Axm-Mcp, FG925-41White FG925-61Black FG925-81Ivory, FG925-90Black

5 . 5 " C O L O R P A S S I V E T O U C H P A N E L S

AXD-MCP/PB

5.5" Color Flush Mount Touch Panel with External Pushbuttons

FG925-41White

FG925-61Black

FG925-81Ivory

The 5.5" Color Flush Mount Touch Panel contains a mini 256 color passive-matrix LCD. The self-contained enclosure uses a microprocessor to control a wide range of multi-media equipment. Using the TPDesign3 software, you can create custom control and display pages with buttons, icons, sliders, bargraphs, time displays, logos and drawings.

•Mounts in a wall, lectern, or any flat surface

•Available with white or black faceplates

•Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

•5.5" color passive-matrix LCD with a resolution of 320x240 pixels

•Visible area: 5 inches (12.70 cm)

•Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

•485 mA @ 12 VDC

MEMORY

•512KB of SRAM and 2MB of flash for a total of 2.5MB (2MB available for buttons, icons, bitmaps, and fonts)

DIMENSIONS

•Decor faceplate: 5.00" x 8.38" x 0.35" (12.70 cm x 21.27 cm x 0.89 cm)

•Low-profile Back Box: 4.25" x 7.10" x 2.17" (10.80 cm x 18.03 cm x 5.51 cm)

•BB-MTP: 4.17" x 6.98" x 2.17" (10.59 cm x 17.73 cm x 5.51 cm)

ENCLOSURES

•Metal sub-plate and bezel with black or white matte finish

•Detachable front panel faceplate

REAR CONNECTORS

•AXLink: 4-pin male connector for transfer of data and power to the AMX Central Controller

PUSHBUTTONS

•12 programmable pushbuttons (6 on each side)

COMPATIBILITY

•Axcess and Landmark Control Systems (AXLink is the most common control standard)

OPTIONAL ACCESSORIES

•PSN2.8 Power supply (can be used on the MCP)

•PSN6.5 Power supply (recommended for use on the MCP)

•4-pin mini-XLR

•Cable assembly

•External pushbuttons (6 per side)

•CB-MTP and faceplate bezel security plates

WEIGHT

•3.90 lbs (1.70 kg)

AXM-MCP

5.5" Rack-Mount

Color Passive Touch Panel

FG925-90Black

•Mounts in a wall, lectern or any flat surface

•Available with a black faceplate

•Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

•5.5" color passive-matrix LCD with a resolution of 320x240 pixels

•Visible area: 5 inches (12.70 cm)

•Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

•485 mA @ 12 VDC

MEMORY

•512KB of SRAM and 2MB of flash for a total of 2.5MB (2MB available for buttons, icons, bitmaps, and fonts)

DIMENSIONS

•Rack-mount: 5.22" x 19.0" x 2.37" (13.26 cm x 48.26 cm x 6.02 cm)

ENCLOSURES

•19" (48.3 cm) rack-mount; metal black matte finish (3 rack units high)

REAR CONNECTORS

•AXLink: 4-pin male connector for transfer of data and power to the AMX Central Controller

COMPATIBILITY

•Axcess and Landmark Control Systems (AXLink is the most common control standard)

INCLUDED ACCESSORIES

•Low-profile Back Box

•4-pin female AXLink bus connector

OPTIONAL ACCESSORIES

•PSN2.8 Power supply (can be used on the MCP)

•PSN6.5 Power supply (recommended for use on the MCP)

•External pushbuttons (6 per side)

WEIGHT

•3.60 lbs (1.60 kg)

For more information about AMX products and services visit www.amx.com	CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
11-03	AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.