AMX PTM-D15 manual S T E M T O O L S, W E R S U P P L I E S

S Y S T E M T O O L S

EXA

Ethernet Crossover Adapter

FG959-10

Used to allow direct connection (without a network hub) between a PC's 10baseT Ethernet port to a Landmark or NetLinx Master Card.

ABS

AXLink Bus Strip

FG960

Why continue stuffing multiple AXLink wires into a few 4-pin terminals? The AXLink Bus Strip provides 10 AXLink terminals and connectors for plug-and- play wiring, as well as a power (PWR) status LED and 12 VDC power input.

APPLICATION

•Plug in AXLink terminals to combine up to 10 AXLink wiring runs

INCLUDES

•12 VDC power status LED

•10 4-pin AXLink connectors

•one 2-pin power connector

•4" double-sided foam tape

DIMENSIONS (HWD): 1.14" x 12.0" x 1.27" (28.95 mm x 304.8 mm x 32.25 mm)

WEIGHT: 5.8 oz (164.42 g)

POWER: 12 VDC, 7 amps max.

STS

Serial-To-Screw Terminal Adapter (DB9 female to screw terminals)

FG959

Need to connect a cable to a DB9 control port? Forget the hassles of parts, pins, and soldering – get an STS, lock the wires down to the built-in screw terminals, and plug it in.

INCLUDES

•DB9 female connector

•Screw terminal block (9-pin)

•Snap-together molded shell

DIMENSIONS (HWD): 0.75" x 1.38" x 2.25" (19mm x 35 mm x 57 mm)

WEIGHT: 1.6 oz (45 g)

IRIS

IR/Serial Data Capture Device

FG5448

IRIS is a stand-alone, self-contained unit used to capture IR or wired function signals from a hand controller. Once captured and verified, the control functions are sent to a PC operating the IRLIB program.

CONTROL PORTS

•IR sensor to receive IR codes

•IR serial input for wired IR codes

•DB-9 female connector for Axcess and PC communication

INCLUDES

•Large, two-digit status LED display

•Adjustable RS-232 port (300-9,600 baud)

•12 VAC power supply

•IRLIB software for IBM-compatible computers

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)

WEIGHT: 18.2 oz (518.2 g)

OPTIONS

•AC-RK Accessory Rack Kit

PM-TERM

PHASTLink 120 Ohm

PHASTLink/CAT-5 Terminator

FG2861-01 20 pack

Used for terminating open PHASTLink, ICSNet or ICSHub outputs

P O W E R S U P P L I E S

PSN2.8

12 VDC, 2.8 A Power Supply (regulated, 110 VAC input)

FG423-17

APPLICATION

•DC power for NetLinx systems

DC POWER OUTPUT

•3.5 mm power connector, 12 VDC at 2.8 A

•Switching regulated, overload protected

AC POWER INPUT

•110/220 VAC auto-switch operation; UL, CSA, and TUV listed

•US power cord included (110 VAC installations only)

ENCLOSURE: Molded black matte plastic, international IEC cable socket

DIMENSIONS (HWD): 4.6" x 2.3" x 1.5"

(117 mm x 58 mm x 35 mm), may vary WEIGHT: 1 lb (450 g), may vary

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.	For more information about AMX products and services visit www.amx.com
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.	11-03