AMX PTM-D15 Nxt-Chg, NXA-CFTP128M, NXA-CFTP256M, CB-TP17, CB-TP15, NXA-RK17, NXA-RK15, NXA-RK12

M O D E R O T O U C H P A N E L A C C E S S O R I E S

NXT-CHG

Quick Charger Kit for Modero

Touch Panels

FG2250K

For added convenience, the NXT-BP Power Pack batteries can be quick-charged with the new NXT-CHG Modero Power Station. The Power

Station is a two-slot, stand-alone unit that recharges up to two “smart" batteries, using sequential charging and recalibration techniques. Through sequential charging, the batteries placed in each slot are recharged one at a time. Through recalibration, each battery can be completely discharged and immediately recharged. This unique feature extends the life of each battery. Recalibration also improves the accuracy of the battery charge reading located on each battery, as well as feedback listed on the Modero Touch Panels on- screen Battery Base page. Instantly track the life of each battery in order to determine the amount of time available for Touch Panel operation.

FEATURES

•Comes complete with two NXT-BP batteries

•Recharges a set of NXT-BP batteries in approximately 4 hours

CONNECTORS

•Power In: Power from Power Station’s Power Supply barrel connector.

•Battery Interface: 2 (5-pin) connectors one in each charging slot

NXA-CFTP128M

128MB Compact Flash Upgrade

FG2116-22

NXA-CFTP256M

256MB Compact Flash Upgrade

FG2116-23

CB-TP17

Conduit Box for NXD-CV17

FG034-10

CB-TP15

Conduit Box for NXD-CV15 & NXD-CA15

FG032-10

The Conduit Wall Box is an optional accessory for the Modero Flush Mount Modero Touch Panels. The Conduit Box allows the Modero to be mounted directly to the studs/pre-wall and includes a wall box and mounting screws.

17" PRODUCT DIMENSIONS

•13.55" x 17.07" x 3.49" (34.43 cm x 43.36 cm x 8.85 cm)

15" PRODUCT DIMENSIONS

•13.48" x 14.18" x 3.49" (34.24 cm x 36.00 cm x 8.85 cm)

NXA-RK17

Rack Mount Kit for NXD-CV17 &

NXD-CA17

FG2904-52

NXA-RK15

Rack Mount Kit for NXD-CV15 &

NXD-CA15

FG2904-51

NXA-RK12

Rack Mount Kit for NXD-CV12 &

NXD-CA12

FG2904-50

The Rack Mount Kit is an optional accessory for Flush Mount Modero Touch Panels. The kit allows the Modero to be mounted directly on an equipment rack and includes a rack mount frame, screws and washers.

NXA-CFTP512M

512MB Compact Flash Upgrade

FG2116-24

NXA-CFTP1G

1G Compact Flash Upgrade

FG2116-25

NXA-EM128M

128MB SDRAM Upgrade

FG079-01

NXA-EM256M

256MB SDRAM Upgrade

FG079-02

MB-TP17

VESA Mounting Kit for NXD-CV17

FG033-50

MB-TP15

VESA Mounting Kit for NXD-CV15

FG032-50

MB-TP12

VESA Mounting Kit for NXD-CV12

FG031-50

Kits enables installation of the wall mount version of the 17" (NXD-CV17), 15” (NXD-CV15) and 12” ( NXD-CA12) Modero Touch Panels on any VESA(TM)- compliant mount to include pivots, arms, poles, under-cabinet mounts, etc. The kit includes a metal back box with VESA 75 x 75 mm mounting pattern, plastic back cover, and screws. Kit does not include support arm.

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.	For more information about AMX products and services visit www.amx.com
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.	11-03