A X C E S S D A T A C O N T R O L C A R D S
AXC-IR/S
IR/Serial Card
FG740
Most audiovisual devices, such as audio and video cassette recorders, compact disc players and tuners, can be remotely controlled by either infrared (IR) or serial data commands. The AXC-IR/S Infrared Serial Card generates programmed commands specific to each device by manufacturer, model number and function. Up to 128 functions can be programmed into each card. As needs and technology change, existing cards can be reprogrammed and new cards can be added to the system. One Infrared/Serial Card is required for each device.
APPLICATION
•Stores and transmits IR and IR/serial control commands
•Commands stored in non-volatile memory
CONTROL PORT
•IR control port with IR emitter and IR/serial connections
INCLUDES
•One status LED for transmit
•One micro-jumper sets card for No Carrier or Normal operation
•One CC-IRC or CC-SER control cable
POWER REQUIREMENT: 45mA @ 12 VDC
AXC-MIDI
MIDI Interface Card
(Musical Instrument Digital Interface)
FG745-K
The AXC-MIDI MIDI Interface Card provides control to the following devices for integration with other studio devices such as lights, volume and non-MIDI devices: Music keyboards, mixers, electronic instruments, equalizers, routing switchers, recording/reproducing decks, computers and control systems.
APPLICATION
•Controls mixers, equalizers and other devices that use MIDI communication
CONTROL PORTS
•MIDI In, Out and Through
INCLUDES
•Three status LEDs for MIDI In, Out and Thru Cable for MIDI Out
POWER REQUIREMENT: 20 mA @ 12VDC
AXC-SMP
SMPTE Time Code Card
FG744
Audio/visual events, multi-image presentations and multi-scene lighting events require a standardized method of synchronization for material during presentations and performances. The Society of Motion Picture and Television Engineers (SMPTE) has formulated an industry-wide standard by creating a digital encoding/decoding process. The AXC-SMP SMPTE Time Code Card can receive time code from any audio source such as videotape, audio reel-to- reel and cassette decks. This allows precise, simultaneous operation of Axcess functions and other events.
APPLICATION
•Sends and receives SMPTE time codes using line-level audio
•1/10 second accuracy
CONTROL PORT
•SMPTE input and output
INCLUDES
•Two status LEDs for transmit and receive
POWER REQUIREMENT: 45 mA @ 12 VDC
For more information about AMX products and services visit www.amx.com
11-03
A X C E S S C O N T A C T C L O S U R E C A R D S
AXC-INP8
8 Input Card
FG785
The AXC-INP8 Switch Opto Voltage Input Card provides eight inputs that can respond to switch closures or voltage level (high/low) changes. Input signals may originate from tape transports, limit switches, foot mats or the AMX PCS Power Current Sensor. Each input may be set for either switch closure (SW) or voltage operation (VO), allowing a combination of either application on the same AXC-INP8 card. Inputs set to the switch mode share the same Axcess system ground. When an input is set to voltage mode, it is opto-isolated from the system and can accept AC or either polarity DC signals.
APPLICATION
•Receives switch closures or logic high-/low-frequency level changes
CONTROL PORTS
•Eight input channels, 28 VDC or 24 VAC maximum
•Input closures act as Axcess channel Push or Release
•Voltage level below 1.5 V is read as a logic low (Push or On)
•Inputs set to voltage operation are opto-isolated
INCLUDES
•Eight channel status LEDs
•Eight pairs of micro-jumpers change channels from switch to voltage operation
AXC-SLD
Slide Projector Control Card (US Kodak® series)
FG720-K
The AXC-SLD Slide Projector Control Card provides commands for forward, reverse, focus in and focus out. With the optional AMX PC1 Power Controller, this card also provides AC Power on/off. Each projector requires one card, and up to 255 slide projectors can be controlled in one system with additional AMX CardFrames and cards. The AMX-SLD is designed for the Kodak series of slide projectors. It may also be used with compatible models. Two extra AUX relays are provided for additional user controls.
APPLICATION
•Relay control of US Kodak-style slide projector
CONTROL PORTS
•Five relays for Forward, Reverse, Focus in, Focus out and Power on/off
•Two auxiliary relay channels for special applications
INCLUDES
•Seven channel status LEDs
•One Kodak-style EBY control cable
POWER REQUIREMENT: 50 mA @ 12 VDC (card only)
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
