AMX PTM-D15 manual I N P U T S E N S O R S, PCS2, VSS2, RTS-1

I N P U T S E N S O R S

PCS

Power Current Sensor

(for US 110 VAC 3-pole receptacles)

FG426

The PCS Power Current Sensor can sense high, low or no power level states for one device. It requires external DC power.

CONTROL PORTS

•Two open collector transistor outputs (On and Standby)

INCLUDES

•LED indicators for Standby and On status

•Sensing for 30 mA-15 A power current levels

•3-prong, grounded 120 VAC receptacle

ENCLOSURE: Plastic with black matte finish

DIMENSIONS (HWD): 3.1" x 2.2" x 2.5" (80 mm x 57 mm x 64 mm)

WEIGHT: 4 oz (114 g)

OPTIONS

•12 VDC power supply

PCS2

Dual Power Current Sensor

(for US 110 VAC 3-pole receptacles)

FG427

The PCS2 Dual Power Current Sensor can sense high, low or no power level states for two devices, and includes a built-in power supply.

CONTROL PORTS

•Four relay outputs (On and Standby for each source),1 A @ 28 VDC

INCLUDES

•On and Standby status LEDs for each source

•Power LED

•Sensing for 20 mA, 10 A power current levels

•Two US-style 3-prong 120 VAC receptacles

POWER

•1200 W (10A) input power, fuse protected

•US-style 3-prong 120 VAC power cord

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)

WEIGHT: 28.8 oz (806 g)

OPTIONS

•AC-RK Accessory Rack Kit

For more information about AMX products and services visit www.amx.com

11-03

VSS2

Video Sync Sensor

FG5916-10

The VSS2 includes two independent signal detection channels. Each channel triggers a logic-level output when a signal is present. Dual video jacks for each channel allow loop-through operation. Great for use as a power sensor for VCRs and other video sources, or to provide a warning on loss of audio, video, or RGB signal.

FEATURES

•Detects presence of signal from 1 kHz to greater than 100 kHz

CONTROL PORTS

•Two solid-state outputs for channels A and B

INCLUDES

•Four RCA jacks

•Two for each channel for loop-through operation

ENCLOSURE: Molded black matte plastic

DIMENSIONS (HWD): 1.5" x 5.0" x 5.3" (38 mm x 127 mm x 133 mm)

WEIGHT: 10.9 oz (309 g)

RTS-1

Room Temperature Sensor (requires AXC-TEMP card)

FG748

The surface-mounted RTS-1 sends precise temperature measurement, from 0°- 250° F (-18°-120° C), to the AXC-TEMP Temperature Control Card.

CONTROL PORTS

•Level output

•Power input

ENCLOSURE: Off-white metal for wall mounting

DIMENSIONS (HWD): 4.5" x 2.8" x 0.9" (114 mm x 70 mm x 23 mm)

WEIGHT: 3.2 oz (91 g)

TVS

TV Sensor

FG691

The TVS TV Sensor is an intelligent, digital scan frequency sensor that can send a power on/power off closure signal to an AMX Input/Output control port. When used with Axcess and NetLinx Integrated Controller I/O ports, the TV Sensor can be an integrated solution for automatic, sensed power control of video/graphic displays.

CONTROL PORTS

•One solid-state closure output (Sensed power on/off)

INCLUDES

•Power on/off status LED

•Internal frequency-sensor logic, (15-75 kHz)

•Five-wire cable for closure output, 12 VDC input

ENCLOSURE: Black plastic with matte finish

DIMENSIONS (HWD): 1.1" x 1.1" x 0.8" (27 mm x 27 mm x 20 mm)

WEIGHT: 1.1 oz (3 g)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.