A M X I N C O N C E R T W I T H L U T R O N

ALD-D48

AMX Network Lighting Solution Dimmer

Interface

FG2604

The ALD-D48 is the heart of an AMX integrated network lighting solution. The programmatic interface to the ALD-D48 appears similar to an AMX native device in that it utilizes a standard

AMX command set. When used with ALD dimmers and switches a complete NetLinx compatible lighting system is formed.

Each ALD-D48 can support up to 48 Vareo switches (12 buses with four switches per bus). Further, up to 10 ALD-D48s can be connected to one NetLinx master. This produces a network of control for 480 switches.

ALD-1000NS

1000 W/VA Vareo Switch

FG2604-30

The ALD-1000NS is a Vareo-Style, 1,000 W switch and is used in concert with the ALD-D48 Dimmer Interface to provide a total Network Lighting Solution. It functions much like a standard switch with an integral microprocessor that

allows them to be incorporated into a lighting control system. The Vareo-Style Dimmers/Switches are useful in locations where single circuits of lighting need to be dimmed or switched on and off. Advanced features include fade on/fade off, slow fade off, and rapid full on. Vareo-Style Dimmers/Switches include a front accessible air-gap switch for safe lamp replacement. All Vareo-Style models can be installed in either single pole or 3-way applications.

ALD-1000D

1000 W/V/A Vareo Dimmer

FG2604-10

The ALD-1000D is a Vareo-Style, 1,000 W dimmer and is used in concert with the ALD-D48 Dimmer Interface to

provide a total Network Lighting Solution. It functions much like a standard dimmer with an integral microprocessor that allows them to be incorporated into a lighting control system. The Vareo-Style Dimmers/Switches are useful in locations where single circuits of lighting need to be dimmed or switched on and off. Advanced features include fade on/fade off, slow fade off and rapid full on. Vareo-Style Dimmers/Switches include a front accessible air-gap switch for safe lamp replacement. All Vareo-Style models can be installed in either single pole or 3-way applications.

ALD-VETS-R

Auxiliary Switch for Vareo Dimmers/Switches

FG2604-40

To achieve 3-way control of lights, the ALD-VETS-R is used as an auxiliary tap switch in conjunction with the Vareo-Style Dimmers/Switches. As many as nine VETS-R controls can be used with a single Vareo-Style Dimmer/Switch.

ALD-600D

600 W/V/A Vareo Dimmer

FG2604-20

The ALD-600D is a Vareo-Style, 600 W dimmer and is used in concert with the ALD-D48 Dimmer Interface to provide a

total Network Lighting Solution. It functions much like a standard dimmer with an integral microprocessor that allows them to be incorporated into a lighting control system. The Vareo-Style Dimmers/Switches are useful in locations where single circuits of lighting need to be dimmed or switched on and off. Advanced features include fade on/fade off, slow fade off, and rapid full on. Vareo-Style Dimmers/Switches include a front accessible air-gap switch for safe lamp replacement. All Vareo-Style models can be installed in either single pole or 3-way applications.

ALD-VWP-2

Lutron 2 Gang Wall Plate

FG2604-60

ALD-VWP-3

Lutron 3 Gang Wall Plate

FG2604-61

ALD-VWP-4

Lutron 4 Gang Wall Plate

FG2604-62

For more information about AMX products and services visit www.amx.com

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

11-03

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

 

Page 78
Image 78
AMX PTM-D15 manual X I N C O N C E R T W I T H L U T R O N