C O N T A C T C L O S U R E I N T E R F A C E S

AV2SM

Auto/Manual Video Switcher

FG5919

This 2x1 video/stereo audio switcher can be set for automatic or manual operation. In the standard manual mode, a single latched closure is used to select and activate the “B" video input. In the automatic mode, the “B" input is programmed to switch instantly to the “A" input when “video sync" is detected. The “A" input, recognized as the default input, always has priority.

FEATURES

Detects presence of video sync in auto mode (NTSC, PAL, or SECAN)

CONTROL PORTS

Three BNC female connectors for Video Input A, B and Video Out

Captive-wire connectors for unbalanced audio and closure input

RESPONSE

Video – 8 MHz

Audio – 30 Hz to 20 kHz

INCLUDES

Internal jumper to select auto or manual (default) mode ENCLOSURE: Molded black matte plastic DIMENSIONS (HWD): 1.65" x 5.09" x 6.09"

(41.91 mm x 129.28 mm x 154.68 mm) WEIGHT: 10.9 oz (309 g)

PC1

Power Controller, 10 A (110 VAC only)

FG670

The PC1 provides one switched outlet for 120 VAC power control up to 1200 W.

CONTROL PORTS

Either one latched or two momentary closures for discrete on and off, or one momentary closure for toggling on and off

Switched AC receptacle, 10 A at 120 VAC

INCLUDES

Front-panel on/off button with status LED

DIP switch to set closure mode

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)

WEIGHT: 1.6 lbs (737 g)

OPTIONS

AC-RK Accessory Rack Kit

PC2

Dual Power Controller, 5 A (110 VAC only)

FG675

The PC2 provides two switched outlets for 120 VAC power control up to 1200 W.

CONTROL PORTS

Either one latched or one momentary closure for toggling on and off

Two switched AC receptacles, total load up to 10 A at 120 VAC

INCLUDES

Two front-panel on/off buttons with status LEDs

DIP switch to set closure mode

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)

WEIGHT: 1.6 lbs (737 g)

OPTIONS

AC-RK Accessory Rack Kit

UPC20+

Universal Power/Motor Controller, 20 A (110/220 VAC input)

FG672

The UPC20+ is a dual 20-amp AC power and motor controller designed for conduit installation. The UPC20 can be configured for a wide variety of power and motor control modes. Low-voltage contact-closure or open-collector inputs allow control from simple wall panels or large systems. It is ETL listed.

CONTROL INPUTS

Four closure inputs; operation defined by mode

-Motor Control mode alternates between the timed operation of the two power relays

-Power Control mode allows independent control of both power relays

CONTROL PORTS

Two 2400 W power relays

INCLUDES

One-, two- and three-button logic modes

Local test switches with status LEDs

115, 230 and 277 VAC control capability

ENCLOSURE: Metal with black matte finish, knockouts for conduit

DIMENSIONS (HWD): 8.5" (10.5" including flange) x 4.5" x 2.2" (220 mm (270 mm including flange) x 110 mm x 60 mm)

WEIGHT: 3 lbs (1.4 kg)

POWER: Self-powered when used with 110/220 VAC applications

OPTIONS

12 VDC power supply (required for 277 VAC applications)

For more information about AMX products and services visit www.amx.com

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

11-03

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

 

Page 67
Image 67
AMX PTM-D15 manual N T a C T C L O S U R E I N T E R F a C E S, AV2SM, PC1, UPC20+