Hole Positions for a Stand-alone UPS Enclosure with L-shaped Anchoring Brackets

Note: Recommended minimum number of screws per enclosure for the L-shaped brackets is

four; one in each corner. Recommended floor bolt size: M8.

Model Width: 352 mm (13.85 in) and 523 mm (20.59 in)

Hole Positions for Up to Four UPS Units in Parallel with U-shaped Anchoring Brackets

Note: Recommended minimum number of floor screws for the two configurations below is 10.

Model Width: 352 mm (13.85 in)

10

MGE™ Galaxy™ 3500 10-30 kVA 208/220 V Single and Parallel Installation 990-1957C-001