3.On each side of the same enclosure insert a maximum of nine and a minimum of two M8 screws (not provided) through holes in the bottom of the enclosure and through holes in the U-shaped floor anchoring brackets, and into the pre-drilled floor holes.

4.Fasten the screws.

5.Move the adjacent enclosure on its casters close to the enclosure with the U-shaped floor anchoring brackets.

Note: If the adjacent enclosure is on its leveling feet, use a forklift or pallet jack to move it into position to avoid damaging the leveling feet.

14

MGE™ Galaxy™ 3500 10-30 kVA 208/220 V Single and Parallel Installation 990-1957C-001