Configuration
System Settings
Set Up the Network
1.Select Admin and press ENTER.
UPS | Alarms |
Power Dist | Log |
Switch Gear | → Admin |
Environment | Help |
2.Select Network Setup and press ENTER.
→ Network Setup
Local Interface
Date/Time
Device ID
3.Select Mode and press ENTER.
Stat:
→ Mode:
IP:
SM:
4.Select Fixed IP Addr to give a specific IP address to the UPS system or select one of the other three methods to obtain an IP address. In this example Fixed IP Addr mode is selected.
5.Select IP (Internet Protocol), SM (Subnet Mask), and GW (GateWay) and change the settings using the UP and DOWN arrow keys. Press ENTER to confirm the changes.
→Fixed IP Addr DHCP Only BOOTP Only
DHCP & BOOTP
→IP:
→SM:
→GW:
20 | Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation |