APC AR8136BLK200, SYCF160KH Replace a Power Distribution Module

Replace a Power Distribution Module

Note: The load that is connected to the actual power distribution module will not be supported when the locking latch on the module is opened.

1.Switch the breakers to the OFF position.

2.Disconnect the power cable from the power distribution module’s extension cable or Rack-Mount PDU.

3.Open the locking latch on the module and gently pull the module out of the enclosure.

4.Take the replacement power distribution module and open the locking latch. Route the power cable through the top of the enclosure and slide the power distribution module into place.

5.Secure the latch to lock the module.

6.Switch the breakers to the ON position.

990–3015E-001

Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation

Contents

Symmetra™ PX 48, 96, and 160 kW 400 V 100 kW 208 Legal Disclaimer Table of Contents Companion Manuals Find Updates to this Manual User Interface Modes Status and Alarm Messages Modular Distribution Fault List PDU Fault List About this Manual Companion Manuals Find Updates to this Manual Overview User Interface Display Interface Main Menu Screen Power Dist Switchgear Alarms Help Menu Tree Caution: ESC Operation Modes Normal Operation Battery Operation Static Bypass Operation Perform a Total Power Off Page Start the System after Total Power Off Yes, Turn UPS On Turn the UPS Load Off Turn the UPS Load On Transfer the UPS into Maintenance Bypass Operation YES, Turn UPS Off XR Battery Enclosures/PDU-XR Return to Normal Operation from Maintenance Bypass Operation 8.Select Turn UPS On into Bypass and press Continue Turn On Yes, On Into Bypass UPS out of Bypass Yes, Out of Bypass View the Status Screens View the Log Screen Configuration System Settings Set Up the Network Change the Display Interface Settings Change the Date and Time Configure Input Contacts Configure Output Relays Maintenance Life Cycle Monitoring (LCM) Parts Replacement Determine if you Need a Replacement Part Return Parts to Schneider Electric Page Replacement Parts Replace a Power Management Card Replace a Power Module Replace a Battery Storage of the battery modules: Page Replace a Power Distribution Module Troubleshooting Status and Alarm Messages Display Messages Option “Replace a Power Module“ See “Replace a Power Module“ “Replace a Battery“ modules. See “Replace a Battery“ Power Management Card“ Modular Distribution Fault List PDU Fault List Page Page Worldwide Customer Support