Manuals / Brands / Computer Equipment / Network Hardware / APC / Computer Equipment / Network Hardware

APC AR8136BLK200, SYCF160KH Change the Display Interface Settings, Admin, Local Interface, Display Behavior

1 44

Download 44 pages, 2.89 Mb

Change the Display Interface Settings

1. Select Admin and press ENTER.

UPS	Alarms
Power Dist	Log
Switch Gear	→ Admin
Environment	Help

2.Select Local Interface and press ENTER.

Network Setup

→ Local Interface

Date/Time

Device ID

3.Select Display Behavior and press ENTER.

Local Password

→ Display Behaviour

Alarm Beeper

4.Select Contrast, Key Click, Beeper Volume, or Check Log Light and change the settings using the UP and DOWN arrow keys. Press ENTER to save the changes.

→Contrast ≥ 4 Key Click ≥ On Beeper Volume > High Check Log Light

990–3015E-001

Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation

Contents

Symmetra™ PX 48, 96, and 160 kW 400 V 100 kW 208 Legal Disclaimer Table of Contents Companion Manuals Find Updates to this Manual User Interface Modes Status and Alarm Messages Modular Distribution Fault List PDU Fault List About this Manual Companion Manuals Find Updates to this Manual Overview User Interface Display Interface Main Menu Screen Power Dist Switchgear Alarms Help Menu Tree Caution: ESC Operation Modes Normal Operation Battery Operation Static Bypass Operation Perform a Total Power Off Page Start the System after Total Power Off Yes, Turn UPS On Turn the UPS Load Off Turn the UPS Load On Transfer the UPS into Maintenance Bypass Operation YES, Turn UPS Off XR Battery Enclosures/PDU-XR Return to Normal Operation from Maintenance Bypass Operation 8.Select Turn UPS On into Bypass and press Continue Turn On Yes, On Into Bypass UPS out of Bypass Yes, Out of Bypass View the Status Screens View the Log Screen Configuration System Settings Set Up the Network Change the Display Interface Settings Change the Date and Time Configure Input Contacts Configure Output Relays Maintenance Life Cycle Monitoring (LCM) Parts Replacement Determine if you Need a Replacement Part Return Parts to Schneider Electric Page Replacement Parts Replace a Power Management Card Replace a Power Module Replace a Battery Storage of the battery modules: Page Replace a Power Distribution Module Troubleshooting Status and Alarm Messages Display Messages Option “Replace a Power Module“ See “Replace a Power Module“ “Replace a Battery“ modules. See “Replace a Battery“ Power Management Card“ Modular Distribution Fault List PDU Fault List Page Page Worldwide Customer Support