Manuals / Brands / Computer Equipment / Network Hardware / APC / Computer Equipment / Network Hardware

APC AR8136BLK200, SYCF160KH “Replace a, Power Management Card“

1 44

Download 44 pages, 2.89 Mb

Display Message	Meaning	Corrective Action

Static Bypass Switch Module	The system no longer detects a static	Option 1: Ensure that the static
Removed	bypass switch module.	bypass switch module is installed
		properly.
		Option 2: Call Schneider Electric
		Customer Support for replacement
		of the static bypass switch module.

System in Maintenance Bypass	The system is in maintenance	No corrective action necessary.
	bypass: the Q2 breaker is open and
	the Q3 breaker is closed.
System Power Supply Card Fault	The system power supply card has	Ensure that the power supply card is
	failed and requires replacement.	installed properly. See “Replace a
		Power Management Card“.
System Start-Up Configuration Fault	The system configuration download	Check for other alarms and contact
	has failed. Unable to determine the	Schneider Electric Customer
	system voltage or frame size.	Support (see the back cover).
Technical check recommended	Regular maintenance requirements	Contact Schneider Electric Customer
	and the end of service life	Support (see the back cover).
	consumable components.
Warranty expiring soon	The end of the contractual legal	Contact Schneider Electric Customer
	warranty.	Support (see the back cover).

990–3015E-001

Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation

35

Contents

Symmetra™ PX 48, 96, and 160 kW 400 V 100 kW 208 Legal Disclaimer Table of Contents Companion Manuals Find Updates to this Manual User Interface Modes Status and Alarm Messages Modular Distribution Fault List PDU Fault List About this Manual Companion Manuals Find Updates to this Manual Overview User Interface Display Interface Main Menu Screen Power Dist Switchgear Alarms Help Menu Tree Caution: ESC Operation Modes Normal Operation Battery Operation Static Bypass Operation Perform a Total Power Off Page Start the System after Total Power Off Yes, Turn UPS On Turn the UPS Load Off Turn the UPS Load On Transfer the UPS into Maintenance Bypass Operation YES, Turn UPS Off XR Battery Enclosures/PDU-XR Return to Normal Operation from Maintenance Bypass Operation 8.Select Turn UPS On into Bypass and press Continue Turn On Yes, On Into Bypass UPS out of Bypass Yes, Out of Bypass View the Status Screens View the Log Screen Configuration System Settings Set Up the Network Change the Display Interface Settings Change the Date and Time Configure Input Contacts Configure Output Relays Maintenance Life Cycle Monitoring (LCM) Parts Replacement Determine if you Need a Replacement Part Return Parts to Schneider Electric Page Replacement Parts Replace a Power Management Card Replace a Power Module Replace a Battery Storage of the battery modules: Page Replace a Power Distribution Module Troubleshooting Status and Alarm Messages Display Messages Option “Replace a Power Module“ See “Replace a Power Module“ “Replace a Battery“ modules. See “Replace a Battery“ Power Management Card“ Modular Distribution Fault List PDU Fault List Page Page Worldwide Customer Support