Apple Duo 270C manual Click Initialize Click Init to initialize the hard disk, Using Disks

1.Insert Disk Tools and turn on your computer.

2.Locate the Apple HD SC Setup icon and open it.

The name of the hard disk currently selected is shown as the “volume name.” The SCSI ID number of the selected hard disk is displayed above the Drive button. (The ID number of an internal hard disk is 0.)

3. Click Drive until the disk you want to initialize appears.

The hard disk’s

SCSI ID number

The hard disk’s name

You cannot initialize the disk that you used to start up your computer or the disk that contains the Apple HD SC Setup program.

4.Click Initialize.

5.Click Init to initialize the hard disk.

6.If a message appears asking you to name the disk, type a name and then click OK.

7.Click Quit when you see a message reporting that initialization was successful.

If a message reports that initialization failed, try again.

If initialization fails a second time, take the disk to your Apple- authorized service provider for repair.

106 Chapter 7: Using Disks