ARRI 535B 3.2.4 Inserter/Antiflicker Module, 3.2.5 RS cable, Data cable ZV4

3.2.4 Inserter/Antiflicker Module 3.2.5 RS cable

The compact inserter/antiflicker module, which is mounted on top of the ARRIFLEX 535B’s electronic cover, holds the video camera electronic, an anti flicker processor and the entire inserter. All electronic control elements, as well as all in- and outputs are located here.

The inserter/antiflicker module is available in two versions for PAL or NTSC.

Note:	It is necessary to keep the combination of CCD
	optic module and inserter/antiflicker module
	together as delivered. Mixing the modules might
	lead to reduced image quality.

The RS cable supplies the IVS with power and information regarding the camera speed and shutter mirror position. It plugs into the ARRIFLEX 535B RS connector and the inserter/antiflicker module. Please observe the color coding.

3.2.6	Data cable ZV4
Note:	Sending data to the film camera through the
	IVS is only possible when the IVS is switched on.

The data cable ZV4 is necessary to send additional information such as time code and RS 232 data to the IVS. This cable is necessary if time code is in use or if accessories such as the Laptop Camera Controller need access to the data interface of the IVS and the camera.

If neither time code is used nor data is sent via the serial interface, it is possible to work without the data cable ZV4.

General Description

11