ARRI 535B 6.3.3 White Level –, Setting the brightness, of the Format Markings, 6.3.4Outside – Darkening the Area outside the Format Markings

Inserter Facilities

SUB MENU

FORMAT 1

POSITION

EDGE 1

>WHITE LEVEL 3

OUTSIDE FULL EXIT

SUB MENU

FORMAT 1

POSITION

EDGE 1

WHITE

LEVEL 3

>OUTSIDE FULL EXIT

6.3.3 White Level –

Setting the brightness

of the Format Markings

The brightness of the format markings can be set to black (0), dark gray (1), light gray (2) or white (3).

•Move the cursor > with the keys ß and ü to the line WHITE. Pressing the key ä will switch the settings from 0 to 1 to 2 to 3 and back to 0, pressing the key ö will switch the settings in the opposite direction.

6.3.4Outside – Darkening the Area outside the Format Markings

Note:	This function is only available if one format
	marking is activated. No darkening function is
	available if there is no format marking or if two
	format markings are switched on.

The brightness of the area outside of one format marking can be reduced electronically to emphasize the important image area. The setting FULL shows the outside area with normal brightness, the setting DARK will reduce the brightness of that area.

48