5.3Aligning the Image and Focusing

The position of the image on the CCD chip can vary slightly from film camera to film camera. The video image on the monitor may appear not centered. In addition, it is necessary to focus the lens on every new film camera.

All settings can be made by using a 1.5 mm allen key.

Do not use force!

Both adjustments can be made on the CCD optic module.

Note:

Make sure that the iris is fully open during

 

focusing in order to optimize focus.

•Remove the cover § located at the end of the module by twisting it counter-clockwise to access alignment screws.

cover

Standard Video Controls

33