ARRI 535B 6.3.1 Activate Format Markings

Inserter Facilities

SUB MENU

>FORMAT 1 POSITION EDGE 1 WHITE LEVEL 3 OUTSIDE FULL EXIT

6.3.1 Activate Format Markings

It is possible to have no format marking (OFF), format marking number one (1),

format marking number two (2)

or both format markings at the same time (1 & 2) on display.

If the electronic format markings are not parallel to the ground glass format markings, readjust the CCD chip with the alignment screws on the CCD Optic Module (chapter 5.3).

•Move the cursor > with the keys ß and ü to the line FORMAT. Pressing the key ä will switch from OFF to 1 to 2 to 1 & 2 and back to OFF, the key ö will switch in the opposite direction.

Note:	Pressing the key ENTER INSERT for more than
	three seconds will cause the system to exit the
	onscreen programming mode completely,
	regardless of which menu is activated, with the
	exception of the positioning mode.

46