6.3.2Position - Positioning of the Format Markings
The format markings can be adapted to every different format. The format markings on the ground glass serve as a reference.
To align the electronic format markings with the ground glass markings proceed as follows:
•Point the film camera towards a bright object so that the format markings on the ground glass are clearly visible.
•Move the cursor > with the keys ß and ü to the line POSITION. Call the positioning mode with the keys ä or ö. The sub menu is displayed on the screen §.
The symbol 
indicates that it is now possible to move the left and the upper line of format 1.
The keys ä or ö move the vertical line right or left, the keys ß or ü move the horizontal line up and down.
SUB MENU |
|
|
|
|
FORMAT | 1 |
|
|
|
| > | > | E |
|
> POSITION<> |
| |||
EDGE | 1 |
|
|
|
WHITE |
|
|
|
|
LEVEL | 3 |
|
|
|
OUTSIDE | FULL |
|
| |
EXIT |
|
|
|
|
•When the correct position has been set, confirm by pressing the key ENTER LNSERT briefly.
The symbol will now change from 
to 
. It is now possible to set the lower and right line with the keys ß, ü, ä or ö.
•When the correct position has been set, confirm by pressing the key ENTER INSERT briefly.
If both format markings are activated, the symbol 
is now displayed. In this case the left and upper line of format 2 can be set. Proceed as described above.
Inserter Facilities
47